+CA GLUE- Cyanoacrylates by Bob Smith Industries in Thin, Medium and Thick NEW

Description

This item is PER bottle.  When you buy you get one bottle! If you need more of course order more but the sale is per unit.
Cyanoacrylates (CAs) have become the
adhesive of choice for most hobby and household applications. High
quality CAs such as INSTA-CURE™, when used properly, form bonds
that in many cases are stronger than the material that is being adhered.
INSTA-CURE™ is a highly refined CA which, combined with its freshness,
gives a guaranteed 2 year shelf life. CAs are reactive monomers that
chemically link (polymerize) when pressed into a thin film. The very
thin layer of water moisture present on most surfaces acts as an alkali,
or weak base, which is the catalyst that results in bonding; however,
the presence of detectable amounts of water usually degrades the performance
of CAs.
INSTA-CURE™
(
Thin)
has
a water-thin viscosity that wicks deep into joints by capillary action
and cures in a matter of a few seconds. Surfaces to be bonded must
be tight fitting and should be held together while you apply the CA
around the edges of the seam. At the moment CAs cure, they give off
a vapor that can irritate the nose and eyes, so be prepared. Thin
CAs work very well on balsa since they penetrate into the wood and
form more than just a surface bond.
INSTA-CURE+™ (medium)
is a higher viscosity CA for loose fitting joints in which the adhesive
must bridge gaps. Normally, the thicker CA is applied to one surface
and then the parts are held tightly together for about 5 to 15 seconds.
For large surface areas, including those with close fitting joints
such as laminations, INSTA-CURE+ ™ should also be used. To prevent
premature curing, don’t spread the glue into a thin film. Lay
down a serpentine bead with about 1″ separations on one surface, then
assemble the parts, letting the pressure spread the CA out.
MAXI-CURE™
(
thick
) CA is the best CA for most plastics, including GE’s Lexan
MAXI-CURE™ is the best choice for plastic model assembly. When used with
INSTA-SET™, it works better than any putty for modifying or filling
voids. It can be carved with a knife or razor blade and sanded and
feathered to form a finish indistinguishable from plastic.
MAXI-CURE™ bonds
fiberglass, hardwood, metal and rubber better than any other hobby
adhesive. For gluing to the inside, clothtextured surface of fiberglass,
scrape the area to be bonded with a razor blade or coarse sandpaper
before using MAXI-CURE™ or any other adhesive. It also is best for
bonding the tires for R/C cars.
ALSO, CHECK OUT OUR MANY OTHER BOB SMITH LISTINGS!
PLEASE NOTE: The photos are of 4 bottles simply to show the size. Prices are PER BOTTLE
.
I  will always combine the shipping if you are getting more than one bottle.
After you purchase the glue I will send invoice with correct shipping amount.
NO INTERNATIONAL SHIPPING